Skip to main content

Aluminium Grille/Ceiling

https://haluminium.com


What is Aluminium Grille?
Aluminium grille is one material of suspended ceiling, it is featured in open vision, ventilation, air permeability, the neat lines and lively, distinct gradations, simple and convenient of installation or disassembly. It has become one of the popular product in decoration market. Aluminium grille can be mainly divided into Groove Aluminum Grille and Flat Aluminum Grille.
Our specifications: 
Conventional aluminum grille (Veneered side) standard: 10 mm or 15 mm, Available Width: 20 mm, 40 mm, 60 mm, and 80 mm.
Grille size: 5050mm, 75X75mm, 100X100mm, 125X125mm, 150X150mm, 200X200mm
Flake Grille size: 10 X 10mm, 15 X 15mm, 25 X 25mm, 30 X 30mm, 40 X 40mm, 50 X 50mm, 60 X 60mm.
The smaller spacing, the higher price.
Construction Technology 
1. Fix height dimension, then mark horizontal line used ink fountain on the wall.
2. Fix hanging steel bars using expansion bolt, then fasten the ceiling light steel keel below the bars, remains the steel keel level.
3. Nail aluminum horn line along the horizontal well with masonry nail.
4. Assembling aluminum grille well.
5. Put the assembled aluminum grille on the aluminum angle, in the middle of the position with a wire directly on the light steel keel.
(1). Snap the line
Mark the level points using balance level on each wall or pillar, (if the wall is longer, much more points should be labeled in the middle), pop-up level line (level line above the ground shall generally be 500 ㎜), from level line to ceiling height of design, pop-up level line in chalk color along with the wall or pillar, that is underline of suspended ceiling. At the same time, according to the designed plane graph, pop-up the location of the key keel on the concrete roof. The key keel should be divided from ceiling center to points on both sides, the maximum interval is 1000 mm, and the fixed point spacing of hanger rod is 900 mm ~ 1000 mm. If meet the case that the fixed points of beam and pipe are greater than the designed and code requirements, just increase the number of fixed points.
(2). Fixed Hanging Rods
Adopting the expansion bolt to fix hanging rods. Ñ„ 6mm hanging rod is available. The rod material is cold drawn steel bar or wire rod steel, but use round bar should adopt mechanical to straighten. One end of the rod should weld with L30 * 30 * 3 angles, (Angle aperture should be determined according to the hanging rod and the diameter of the bolts), the other end should be tapped more than 100 mm screw, also can buy finished screw welding. Well-done hanging rods should do antirust processing, they are fixed on the roof with expansion bolt. (Using the impact hammer drilling, the aperture should be slightly greater than the diameter of the bolts.)
(3). Light Steel Keel Installing
Light steel keel should be hanging on the rods (If the suspended ceiling is lower, this procedure can be omitted, directly under the procedure). Generally using 38 light steel keel, the span is 900 mm ~ 1000 mm. Light steel keel should be installed parallel to the room, and be arch camber at the same time, the bulging height span is 1/200 ~ 1/300 of the room. Light steel keel cantilever section should not be more than 300 mm, otherwise, it should add more rods. Extension of the main keel should be butted, adjacent keel butted joints should be staggered each other. After hang up the light steel keel, the structure should be the basic level.
If the span is greater than 15 meters, there should add a big keel every 15 meters in the main keel, and more the big keel should be welded solidly perpendicular to the main keel.
(4). Spring leaf installation
Finishing the connection between hanging rods and light steel keel, the span is 900 mm ~ 1000 mm, then loading the spring leaf on the hanging rod.
(5). Aluminium Grille installation
Hoisting the pre-assembled aluminum grille with a hook thread to the main keel, when connecting the whole grilles, adjust to the level.

Comments

Post a Comment

Popular posts from this blog

4 Advantages of T-slotted Aluminium Extrusion Frame

Whether you are assembling a large production line, installing automation equipment, or setting up a workbench for a production line, you may need a metal framework to install robotic parts, dispensers, or other automated assembly equipment. Many factory owners choose traditional welded steel structures to enhance their strength and durability. However, aluminum extrusion frames are becoming increasingly popular for several reasons. Hoonly Aluminium Extrusion Framework is a modular solution that consists of  Aluminium extrusion profiles  with a unique T-slot design, and series of  specialized connectors & fasteners , which allows designer or purchaser to adjust the structure frame according to their own needs. Because the framework is aluminum, it often has a higher price tag than steel (actually less than stainless steel). But don't you found that aluminum extrusion frames offer distinct advantages over other material frames (such as wood, stainless steel) systems? 1,
Post a Comment
Read more

Application of High Strength Aluminum in Automotive Industry

The huge growing world car ownership is great influencing people's work and life, but resulting a series of problems such as energy shortage, environmental pollution is also increasingly prominent. Light-weight, energy saving, environmental protection, safety, comfort and low cost become the target of each car manufacturer, especially in energy saving and environmental protection, which is the major problem for the sustainable development of the human relationship, energy conservation, and emissions reduction has become an urgent problem in the automotive industry. Light-weight of the automobile,  which means on the premise of guarantee vehicle performance is not affected, auto-manufacturers should be targeted to reduce automobile weight, to ensure the safety and comfort, and meanwhile should not improve the cost. From the life cycle of the automobile products, a fuel consumption cost is the main part of the vehicle life cycle cost, which occupies 71% of the cycle costs. A
Post a Comment
Read more

Overview of Chemical Polishing Aluminium, Electra-chemical Polishing Aluminium and Mechanical Polishing

The general engineering application of wrought aluminium alloy material or building aluminium profile is the process of the semi-finished product. Aluminium extrusion profile manufacturers are generally able to directly put the profiles into anodize production line for anodizing. The obtained anodized film has the good protective properties in many engineering applications, which basically achieves uniform appearance requirements. However, if mechanically polished aluminium work-piece is directly anodized, only the smooth anodize oxide film could be obtained, but fails to get the coating film of high reflective. Chemical polishing and electro-chemical polishing can give aluminium profile a very shiny surface, but in terms of polishing, chemical polishing (or electro-chemical polishing) are fundamentally different from mechanical polishing: Chemical polishing and electrochemical polishing, as an advanced finishing method, can remove slight mold marks and scratches on the surface
15 comments
Read more